Rockwell Automation PowerFlex 7000 User Manual

Rockwell Automation Publication 7000-UM202H-EN-P - November 2023 185
Appendix B PowerFlex 7000 Drive Spare Part Storage Requirements and Recommendations
Spare Parts Connection
Matrix
Use this matrix to determine the appropriate supporting device for each
component type.
Table 22 - Spare Parts Connection Matrix
Component Category Component/Item
Supporting Device
(1)
Variable AC Source
(120/240V)
Variable DC Source
with Current Limiting
Function
PowerFlex 7000
Power Supply 1
(Pioneer/Cosel)
IGDPS Board
SPS Board
SPS Wire Harness
2 Pole Connector
80174-014-01-R
3 Pole Connector
80174-014-02-R
2 Pole Euro Style Plug
80026-131-10
AC
Autotransformer
(120/240V)
(2)
Power Supplies
Pioneer/Cosel
power supply

————————

IGDPS board —

————

———
IntelliVAC module
(3)

———————

Absopulse AC/DC Conv.

————————

Absopulse DC/DC Conv. —

————————
1606 power supply

————————

Control equipment
and Boards
ACB board —

——————

—
Power Components
SGCT
(4)

————
SCR SPGDB
(4)
—

—————

——
SPS board

————

———

(1) The nominal voltage of supporting device/s must be adapted to nominal voltage of energized item.
(2) The AC transformer is used only for the reconditioning procedure instead of variable AC source.
(3) The IntelliVAC module can be energized with AC or DC input voltage.
(4) Energize the SGCT boards using one of the methods below.
a. Assembly of AC power source, PowerFlex 7000 PS1 and IGDPS power supply.
b. Assembly of variable DC power source with current limiting function, SPS board, and wire harness provided with the drive.

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English