Rockwell Automation PowerFlex 755 Drive User Manual

Index-4
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
regulatory compliance, A-1
related documentation, P-1
requested packet interval, 4-9, 4-17
resetting the adapter, 3-17
RSLinx Classic
documentation
, P-1
using, 4-1
RSLogix 5/500/5000, G-6
S
safety precautions, 1-4
scanner, G-6
SLC 500
configuring the I/O
, 4-29
explicit messaging, 6-18
limitations when using the I/O, 4-20
using the I/O, 5-14
specifications
adapter
, A-1
EtherNet/IP address, G-2
EtherNet/IP subnet mask, G-6
status indicators
definition
, G-6
ENET, 1-6, 7-2
LINK, 1-6, 7-2
locating, 1-6
normal operation, 2-5
troubleshooting with, 7-2
understanding, 7-1
Subnet Cfg 1-4 parameters, B-3
subnet mask
definition
, G-6
setting with BOOTP, 3-2
setting with parameters, 3-5
switches, G-7
T
TCP (Transmission Control Protocol), G-7
TCP/IP Interface object, C-34
technical support, P-2
To Peer Enable parameter, B-9
To Peer Period parameter, B-9
To Peer Skip parameter, B-9
tools required, 1-3
troubleshooting, 7-1 to 7-5
U
UDDT (User-Defined Data Type), G-7
UDP (User Datagram Protocol), G-7
update, see flash update
V
Virtual DPI Parameter object, C-28
W
Web Enable parameter, B-4
Web Features parameter, B-4
web pages
enabling with parameter
, 3-16
for the adapter, 8-1 to 8-11
web site for
DriveExecutive software
, G-2
DriveExplorer software, G-2
DriveTools SP software, G-2
EDS files, G-2
EtherNet/IP, G-2
manuals, P-1
ODVA (Open DeviceNet Vendor’s Association),
G-2
RSLogix 5/500/5000, G-6
wiring, see cables
Z
zero data
configuring the adapter for
, 3-14
definition, G-7

Rockwell Automation PowerFlex 755 Drive Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 755 Drive
Category	Adapter
Language	English