Rohde & Schwarz FSWP Series - Page 102

Remote Commands for the I/Q Analyzer
R&S
®
FSWP
102User Manual 1177.5856.02 ─ 07
<OffsSwPoint> The offset in sweep points related to the start of the measure-
ment at which data retrieval is to start.
<NoOfSwPoints> Number of sweep points to be retrieved from the trace.
Return values:
<SweepPointValues>
Example:
TRAC:DATA:MEM? TRACE1,25,100
Retrieves 100 sweep points from trace 1, starting at sweep point
25.
Usage: Query only
TRACe<n>[:DATA]:X? <TraceNumber>
This command queries the horizontal trace data for each sweep point in the specified
window, for example the frequency in frequency domain or the time in time domain
measurements.
This is especially useful for traces with non-equidistant x-values.
Suffix:
<n>
.
Window
Query parameters:
<TraceNumber> TRACe1 | TRACe2 | TRACe3 | TRACe4 | TRACe5 | TRACe6
Trace number.
TRACE1 | ... | TRACE6
Return values:
<X-Values>
Example:
TRAC3:X? TRACE1
Returns the x-values for trace 1 in window 3.
Usage: Query only
8.5.3 Retrieving Marker and Peak Search Results
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT...................................................... 102
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?........................................................... 103
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?........................................................... 103
CALCulate<n>:DELTamarker<m>:X.................................................................................103
CALCulate<n>:DELTamarker<m>:Y.................................................................................104
CALCulate<n>:MARKer<m>:X........................................................................................ 104
CALCulate<n>:MARKer<m>:Y........................................................................................ 105
MMEMory:STORe<n>:LIST.............................................................................................105
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT <SortMode>
This command selects the order in which the results of a peak search are returned.
Retrieving Results