Instrument Functions
NRP2
145User Manual 1173.9140.02 ─ 07
Fig. 4-71: Window Name dialog box
Window 1...4
Assigns an individual name to each window.
Remote command:
DISPlay[:
WINDow]<[1]..4>:
NAME on page 245
4.7 System settings
System settings are configured in the "System" menu.
The menu provides access to the following settings:
●
Configuring the remote control interfaces, on page 145
●
Setting analog outputs, on page
151
●
Power Reference, on page 158
●
System information, on page 158
●
Miscellaneous, on page 160
●
Test measurement, on page 161
4.7.1 Configuring the remote control interfaces
The R&S NRP2 provides different interfaces for remote control. The settings are con-
figured in the "Remote Interfaces" dialog box.
System settings
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
