Manual Operation
NRP2
49User Manual 1173.9140.02 ─ 07
3 Manual Operation
This chapter describes the controls, displays, etc, the screen layout and how to oper-
ate the R&S NRP2.
3.1 Keys
Keys on the front panel of the meter are used to manually operate the instrument.
There are several groups of keys, each group having a different function.
For more information on keys...
According to their functionality, keys are described in several sections of the
R&S
NRP2 documentation. See:
●
Front panel - keys (hard-, soft- and cursor), page 12 for information on the keys
located at the front panel.
●
Brief introduction to the operation - key handling, page 24, providing a brief intro-
duction on how to operate.
●
Instrument functions - Main settings FREQ, PRESET, ZERO, page 61 for infor-
mation on the setup keys FREQ, (PRE)SET and ZERO.
●
Softkey - manual operation > Menu handling, page 53
●
Dialog boxes and their control elements, page 53
3.2 Screen layout
The R&S NRP2 screen displays the menu bar with the menu names and at least one
or more measurement result window. The folded-out menu and the setting dialog
boxes may overlay the result windows.
Result window
Fig. 3-1: Screen layout / result window
Keys
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
