Manual Operation
NRP2
51User Manual 1173.9140.02 ─ 07
To quickly allocate the associated softkey to a menu item, all the menus open directly
next to the softkey bar, i.e. on the right side of the display; this is against usual PC con-
vention with menus drop-down directly below the menu name.
Fig. 3-5: Screen layout / menus next to the rocker switches
See chapter 3.4, "Menu handling", on page 53 for more information on operating the
menu functions.
Dialog boxes
Fig. 3-6: Screen layout / dialog boxes
Dialog boxes can be opened from the menus. The dialog boxes display a group of rela-
ted parameters that can be set.
See chapter 3.5, "Dialog boxes and their controls", on page 53 for more information
on operating the dialog box functions.
3.3
Menu layout
This section describes the menu provided by the R&S NRP2. The meter displays the
menu names in the menu bar at the top of the screen. The menus are selected by the
top-most rocker switch. The following figure shows the main menus of the R&S NRP2,
which are then briefly summarized.
The menu functions are described in the operating manual, chapter 4, "Instrument
Functions", on page 61.
Menu layout
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
