Instrument Functions
NRP2
91User Manual 1173.9140.02 ─ 07
To stop the measurement
► Press the DEL/1TRIG hardkey.
is indicated in the title bar.
To start the measurement again
► Press the DEL/1TRIG hardkey.
is indicated in the title bar.
4.3 Displaying measurement results
The R&S NRP2 provides a total of four windows for displaying results.
4.3.1
Arranging windows
Windows are displayed in numerical order from the top to the bottom of the screen.
The R&S NRP2 automatically selects the window size according to the number of dis-
played windows.
Fig. 4-23: Arranging windows
4.3.2 Labeling windows
The windows are numbered from 1 to 4 and are therefore clearly identifiable. By
default, they are labeled by the window’s number (1 to 4). The label is displayed in the
top left of the title bar.
Windows can also be assigned a name, see
"Window Name"
in the "File" menu. The
name is displayed in the window’s title bar . Assigning meaningful names to the win-
dows makes it much easier to recognize the associated measurement.. A name like
"Amplifier output" is more informative than "Channel A" or "Window 2".
The names of the windows are also stored in the setups.
Displaying measurement results
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
