Rohde & Schwarz NRP2 - Trigger

Remote Control - Commands
NRP2
328User Manual 1173.9140.02 ─ 07
Parameter Value range
<hour> 0 to 24
<minute> 0 to 59
<second> 0 to 59
SYSTem:VERSion?
Returns a string that contains the current version number of the SCPI standard.
Usage: Query only
6.15 TRIGger
The trigger commands are used to configure the timing conditions for the start of a
measurement.
When the sensors are connected to the R&S NRP2, they inform the device about the
SENSe and TRIGger commands supported and about the value ranges for parame-
ters. This applies to both numeric and text parameters. For this reason, no fixed ranges
are specified with these commands; the ranges can be obtained from the respective
sensor manual.
ABORt<[1]..4>............................................................................................................... 329
ABORt:ALL
....................................................................................................................329
INITiate<[1]..4>:CONTinuous.......................................................................................... 329
INITiate:ALL:CONTinuous...............................................................................................329
INITiate<[1]..4>:DISable................................................................................................. 330
INITiate:ALL:DISable......................................................................................................330
INITiate<[1]..4>[:IMMediate]............................................................................................ 330
INITiate:ALL[:IMMediate]................................................................................................ 330
TRIGger:ALL:SYNChronize[:STATe]................................................................................330
TRIGger<[1]..4>:ATRigger[:STATe]................................................................................. 331
TRIGger:ALL:ATRigger[:STATe]......................................................................................331
TRIGger<[1]..4>:COUNt..................................................................................................331
TRIGger:ALL:COUNt......................................................................................................331
TRIGger<[1]..4>:DELay.................................................................................................. 331
TRIGger:ALL:DELay.......................................................................................................331
TRIGger<[1]..4>:DELay:AUTO........................................................................................ 332
TRIGger:ALL:DELay:AUTO.............................................................................................332
TRIGger<[1]..4>:DTIMe.................................................................................................. 332
TRIGger:ALL:DTIMe.......................................................................................................332
TRIGger<[1]..4>:HOLDoff............................................................................................... 333
TRIGger:ALL:HOLDoff....................................................................................................333
TRIGger<[1]..4>:HYSTeresis...........................................................................................333
TRIGger:ALL:HYSTeresis............................................................................................... 333
TRIGger
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com