Instrument Functions
NRP2
168User Manual 1173.9140.02 ─ 07
4.8.2 Interactive messages
The R&S NRP2 provides a lot of interactive messages, as shown in the following
example. Since the information is self-explanatory, these messages are not explicitly
listed in this manual.
Automatic window initialization
Fig. 4-106: Information / New Window
If an additional sensor is connected to the R&S NRP2 during operation and if no cur-
rently open window displays the values measured in the channel concerned, the
R&S NRP2 automatically offers to open a window and to configure it for measurements
with the additional sensor connected.
The previous settings of the newly opened window are lost. To prevent this, we recom-
mend you to cancel with the
ESC key and to manually configure a window.
Messages and alarms
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
