Remote Control Fundamentals
NRP2
188User Manual 1173.9140.02 ─ 07
Menu item in manual control SCPI command in short form
Sensor→Filter→Reset
SENS[1..4]:AVER:RES
In Trace mode:
SENS[1..4]:
TRAC:AVER:
RES
Sensor→Filter→Auto Once
SENS[1..4]:AVER:COUN:AUTO ONCE
In Trace mode:
SENS[1..4]:TRAC:AVER:COUN:AUTO ONCE
Sensor→Filter→Auto Config...→Normal
SENS[1..4]:AVER:COUN:AUTO:TYPE RES
In Trace mode:
SENS[1..4]:TRAC:AVER:COUN:AUTO:TYPE RES
Sensor→Filter→VideoBW
SENS:BWID:VID
SENS:BWID:VID:LIST?
Sensor→Filter→Auto Config...→Fixed Noise
SENS[1..4]:AVER:COUN:AUTO:TYPE NSR
In Trace mode:
SENS[1..4]:TRAC:AVER:COUN:AUTO:TYPE NSR
Sensor→Filter→Auto Config...→Fixed
Noise→Ref Timeslot #
SENS[1..4]:AVER:COUN:AUTO:SLOT
In Trace mode:
SENS[1..4]:
TRAC:AVER:COUN:AUTO:SLOT
Sensor→Filter→Auto Config...→Fixed
Noise→Noise Content
SENS[1..4]:AVER:COUN:AUTO:NSR
In Trace mode:
SENS[1..4]:
TRAC:AVER:COUN:AUTO:NSR
Sensor→Filter→Auto Config...→Fixed
Noise→Max. Settl. Time
SENS[1..4]:AVER:COUN:AUTO:MTIM
In Trace mode:
SENS[1..4]:
TRAC:AVER:COUN:AUTO:MTIM
Sensor→Range→Auto
SENS[1..4]:RANG:AUTO
Sensor→Range→Path
SENS[1..4]:RANG
Sensor→Range→User def'd Transition
Sensor→Range→Level
SENS[1..4]:RANG:CLEV
Sensor→RF Source→Source Γ considered
SENS[1..4]:SGAM:CORR:STAT
Sensor→RF Source→SPhase of Source Γ
SENS[1..4]:SGAM:PHAS
Sensor→RF Source→Magnitude of Source Γ
SENS[1..4]:SGAM
Sensor→Trigger→Mode No individual remote-control command is available; the
trigger system has to be configured in such a way that the
function can be implemented (e.g.
INIT:CONT ON;TRIG:
SOUR BUS
and triggering with
*TRG).
Sensor→Trigger→Delay
TRIG[1..4]:DEL
Sensor→Trigger→Source
TRIG[1..4]:SOUR
Sensor→Trigger→
TRIG[1..4]:SLOP
Sensor→Trigger→Level
TRIG[1..4]:LEV
Correspondence between Remote Control and Manual Control
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
