Error Messages and Troubleshooting
NRP2
348User Manual 1173.9140.02 ─ 07
8.3.1 Boot Menu
Fig. 8-4: Boot menu
► Select a function by using the respective softkey.
System Info
Opens the system info menu. This menu provides soft- and hardware information to
the instrument, e.g. serial numbers, firmware version or ethernet address.
Fig. 8-5: Boot menu / System Info
Service
Opens the R&S NRP2 service menu, see chapter 8.3.2, "Service Menu", on page 349.
Erase Nonvol-Data
Deletes the non-volatile memory containing instrument settings.
This measure is recommended after the error message 'Sensor communication error'
appears.
The device displays a warning message prior to deletion and requires confirmation of
the deletion.
Bootmenu
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
