Getting Started
NRP2
35User Manual 1173.9140.02 ─ 07
The "Windows" menu contains all the functions required for opening, closing and
configuring windows.
Fig. 2-14: Window menu / Digital
2. Check if window 1 has been selected.
3. Press the "Expand"
softkey.
Window 1 now expands to full size below the menu bar and displays all relevant
settings:
- measurement modes of contributing channels (A (ContAV))
- Trigger mode (auto)
- averaging number and mode (32 Auto)
- Offset (10 dB)
- S parameter device (none)
- duty cycle correction (none)
Fig. 2-15: Result window / key measurement parameters
4. To return the window to its normal size, open the "Windows" menu with the
↵MENU hardkey and press the
"Arrange" softkey.
Measuring average power (Cont Av mode)
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
