Getting Started
NRP2
42User Manual 1173.9140.02 ─ 07
Fig. 2-27: Result windows / sensor A and B
3. Select the "Measurement" menu and then select "Function..." for window 1 of this
menu.
4. Open the "Function & Unit" dialog box.
Fig. 2-28: Function & Unit dialog box / ratio
In this dialog box, you can select the function used to calculate the result in the
selected window. For example, "Ratio (A/B)"
yields the quotient from the measured
power values in channels A and B.
5. Select "Ratio (A/B)" from the drop-down list for the measurement function and
close the drop-down list with ↵ MENU.
6. Now, press the "Unit" softkey.
Setting measurement functions
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
