Manual Operation
NRP2
59User Manual 1173.9140.02 ─ 07
Correction functions Trigger
Duty cycle correction ON Trigger
Offset correction ON Free-running trigger
Twoport correction ON (S-
parameter)
Trigger event missing
Filter
Single-shot mode, trigger expec-
ted
Averaging filter Single-shot mode, measurement
over
Filter size with auto-filter (normal
mode) or for manual mode
Trigger source external
Trigger on rising slope
Noise component with auto-filter
in "Fixed Noise" mode
Trigger on falling slope
Noise ratio exceeded Measurement in progress
Measurement stopped
Physical trigger event
Other
Trigger threshold
Over limit Delayed trigger event (reference
time)
Table 3-2: Symbols for pulse parameters
Pulse Time Parameter Pulse Power Parameter
Pulse Width Pulse Top
Duty Cycle Trace Avg
Rise Time Trace Min
Start Time Pulse Base
Pulse Period Trace Peak
Pulse Off Time Pos. Overshoot
Fall Time Neg. Overshoot
Stop Time
Display windows
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
