Getting Started
R&S
®
ZNB/ZNBT
62User Manual 1173.9163.02 ─ 53
4.3.4.4 Using Drag and Drop
You can drag and drop many of the R&S ZNB/ZNBT's control and display elements to
change their size and position. The drag and drop functionality is often more conven-
ient to use than the equivalent buttons of the softtool panels. The following table gives
an overview.
Table 4-6: Drag and drop functionality for various screen elements
Screen element Action Drag and drop...
Diagram Create See Chapter 4.3.4.1, "Adding New Traces and Diagrams", on page 59
Resize Separator between adjacent diagrams
Delete See Chapter 4.3.4.3, "Deleting Display Elements", on page 61
Trace Create See Chapter 4.3.4.1, "Adding New Traces and Diagrams", on page 59
Move vertically Reference line marker (right diagram edge)
Move into other or new
diagram
Trace line
Delete See Chapter 4.3.4.3, "Deleting Display Elements", on page 61
Reset / suspend
graphic zoom
"Zoom" element in additional trace line --> "Delete" icon; see Chapter 4.3.6.1,
"Using the Graphical Zoom", on page 66
Marker Create See Chapter 4.3.4.2, "Adding New Markers", on page 60
Move horizontally Marker symbol
Delete Marker or marker info field --> "Delete" icon; see Chapter 4.3.4.3, "Deleting Dis-
play Elements", on page 61
Marker info field Add See Chapter 4.3.4.2, "Adding New Markers", on page 60
Move within diagram Marker info field (move to one of several pre-defined positions)
Delete See Chapter 4.3.4.3, "Deleting Display Elements", on page 61
4.3.5 Entering Data
The analyzer provides dialogs with various types of input fields where you can enter
numeric values and character data. Data entry with a mouse and an external keyboard
is a standard procedure known from other Windows
®
applications. However, there are
various other ways to enter data.
4.3.5.1 Using Front Panel Keys
On a R&S ZNB you can use the keys in the DATA ENTRY keypad to enter numbers,
units, and characters.
Operating the Instrument
To Next Page
Loading...
