Rohde & Schwarz R&S ZNB - External Ports Tab

GUI Reference
R&S
®
ZNB/ZNBT
700User Manual 1173.9163.02 ─ 53
Physical
interface
(connector)
Interface
(protocol)
Address Remarks
USB USB-VISA
<ManID>::<ProdID>::<SerialNo>
e.g. 0x0AAD::0x0047::100098
2733 (0x0AAD) is the manufacturer ID of
Rohde & Schwarz.
71 (0x0047) is an example for a R&S prod-
uct ID (R&S SMF100A).
The serial number is device-specific.
LAN or USB Other Interface-specific, e.g. for SOCKET:
TCPIP0::<IpAddress>::<PortNo>::SOCKET
For USB-VISA:
USB0::<ManID>::<ProdID>::<SerialNo>::INSTR
Use complete VISA resource string.
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:DEFine
6.17.5 External Ports Tab
Allows you to set up switch matrices and to redefine physical ports.
Background information
Refer to:
●
Chapter 5.7.22, "External Switch Matrices", on page 241
●
Chapter 5.3.1.2, "Redefined S-Parameters", on page 117
6.17.5.1 Controls on the External Ports Tab
The buttons in the "External Ports" panel open the following dialogs:
●
"Define Ports...", see Chapter 6.17.5.2, "Define Physical Ports Dialog",
on page 701
●
"Switch Matrix...", see Chapter 6.17.5.3, "External Matrices Dialog", on page 701
●
"RF Connections...", see Chapter 6.17.5.5, "Switch Matrix RF Connections Dialog",
on page 706
Setup Softtool