Rohde & Schwarz R&S ZNB - Page 660

GUI Reference
R&S
®
ZNB/ZNBT
660User Manual 1173.9163.02 ─ 53
Some of the "Split" settings are also available in the Diagram Tab. Refer to the follow-
ing sections:
●
"Overlay All" on page 658
●
"Split All" on page 659
Dual Split / Triple Split / Quad Split
Splits the diagram area into two (three / four) diagrams and distributes the traces
among the diagrams. Traces with different format and channel settings (e.g. Cartesian
and complex diagrams) are separated, if possible. Example of four traces in "Quad
Split" display:
If less than two (three / four) traces are available, the new diagrams are created with a
default trace. Dual (triple / quad) split corresponds to "Split Type: Tile Horizontal" with 2
(3 / 4) diagrams.
Tip: To vary the size and position of the diagrams, drag and drop the separating
frames or use the functions in the "Diagram" tab.
Display Softtool