Rohde & Schwarz R&S ZNB - Page 72

Getting Started
R&S
®
ZNB/ZNBT
72User Manual 1173.9163.02 ─ 53
4.4.1.1 Connecting the Instrument for Transmission Measurements
To prepare a transmission measurement, you have to connect your DUT (which for
simplicity we assume to have appropriate connectors) in-between a pair of analyzer
test ports. It is recommended that you preset the R&S ZNB/ZNBT to start from a well-
defined instrument state.
DUT
1 2
VNA
1 2
2 3 4
5 6 7 8
9
10 11 12
13 14 15 16
1
18 19 20
21 22 23 24
17
DUT
1 2
VNA
Performing Measurements