Rohde & Schwarz SMIQ02B - Menu DIGITAL STANDARD - PHS

SMIQ Digital Standard PHS
1125.5555.03 E-92.119
2.11.5 Menu DIGITAL STANDARD - PHS
Menu DIGITAL STD - PHS provides access to settings for generating PHS signals.
Menu selection:DIGITAL STD - PHS
FREQ
100. 000 000 0
MHz
FREQUENCY
LEVEL
ANALOG MOD
VECTOR MOD
DIGITAL MOD
DIGITAL STD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
PHS
PHS
IS-95
NADC
PDC
GSM
STATE
MODULATION...
TRIGGER MODE...
EXECUTE TRIGGER
TRIGGER...
CLOCK...
POWER RAMP CONTROL...
SLOT ATTENUATION
SAVE/RCL FRAME...
SELECT SLOT
DN UP
12341234
OFF ON
Π /4DQPSK 2 b/sym
AUTO
INT
INT
...
15.0 dB
SYNC
LEVEL
-30.0
dBm
PEP
-27.5
dBm
Fig. 2-69 Menu DIGITAL STD - PHS, SMIQ equipped with Modulation Coder SMIQB20 and Data
Generator SMIQB11
STATE
Switch on/off of Digital Standard PHS modulation. Vector Modulation or Digital
Modulation will be switched off automatically.
IEC/IEEE-bus command
:SOUR:PHS:STAT ON
MODULATION...
Opens a window for setting the modulation parameters.
Fig. 2-70 Menu DIGITAL STD - PHS - MODULATION..., SMIQ equipped with Modulation Coder
SMIQB20 and Data Generator SMIQB11