Rohde & Schwarz SMIQ02B - RF Sweep

Sweep SMIQ
1125.5555.03 2.396 E-9
2.26.6 RF Sweep
Menu SWEEP - FREQ offers access to settings for RF sweep.
Menu selection: SWEEP - FREQ
Fig. 2-246 Menu SWEEP - FREQ
START FREQ
Input value of the starting frequency.
IEC/IEEE-bus command
:SOUR:FREQ:STAR 100MHz
STOP FREQ
Input value of the stop frequency.
IEC/IEEE-bus command
:SOUR:FREQ:STOP 500MHz
CENTER FREQ
Input value of the center frequency.
IEC/IEEE-bus command
:SOUR:FREQ:CENT 300MHz
SPAN
Input value of the span.
IEC/IEEE-bus command
:SOUR:FREQ:SPAN 100MHz
CURRENT FREQ
Indication of the current frequency value.
Operating mode STEP: Input value of the frequency.