The Help System SMIQ
1125.5555.03 E-92.432
2.30 The Help System
The SMIQ has two help systems. On the one hand the context-sensitive help which is called by means
of the HELP key and which gives information on the current menu. On the other hand, auxiliary texts
can be selected according to headwords in alphabetical order by accessing menu HELP.
HELP Key
The yellow HELP key can be pressed at any point in time. The current setting menu is faded out and
context-sensitive text faded in. The help panel can be exited by means of the RETURN key.
Menu HELP
After calling the help menu, access to all auxiliary texts is possible via an index. Operation is analog to
menu operation.
Ø Set the menu cursor to the index desired using the shaft encoder.
Ø Press the [SELECT] key.
Ø The information for the index marked is displayed.
Ø Press the [RETURN] key to exit the menu.
2.31 Status
By means of a STATUS page, the SMIQ permits an overview over all settings of the instrument. The
settings are displayed in an abbreviated form. The STATUS page is called by pressing the [STATUS]
key. Return to the preceding menu is effected using the [RETURN] key.
AM: INT 30.0% LFGEN1;
BB-AM: OFF
FM1: OFF / PM1: OFF
FM2: OFF / PM2: OFF
PULSE: OFF
VECTOR: OFF; IMPAIR: OFF
POWER RAMP CONTROL: OFF
DM:OFF
LF: 1.000 0kHz
LF-OUTPUT: OFF
SWEEP / LIST: OFF
BLANK POL: NORM; TIME: NORM
REF OSC: 10MHz INT ADJUST: OFF
ALC: ON
TRIGGER SLOPE: POS
LOCAL
UNLOCKED
FREQ
100. 000 000 0
MHz
AM
LEVEL
- 30.0
dBm
ALC-ON
Fig. 2-276 Menu STATUS page
To Next Page
Loading...
