Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0) SMIQ
1125.5555.03 E-92.168
(DATA...) TPC
Selection of the data source for the TPC field of a
DPDCH channel.
0 0 data are continuously generated
1 1 data are continuously generated
ALT The TPC field is alternately assigned with
1 or 0 from slot to slot.
(The first slot contains 1 data).
DLIST Data from a list previously programmed
and stored. Programming is performed in
the menu DIGITAL MOD - SOURCE -
EDIT DATA LIST
IEC/IEEE-bus :SOUR:WCDM:CHAN4:I:TPC ZERO
STATE
Activation or deactivation of the I or Q component of the assigned code
channel. The I or Q component of channels with common power-up should
always have the same state ON or OFF.
IEC/IEEE-bus command :SOUR:WCDM:CHAN4:I:STAT ON
To Next Page
Loading...
