Digital Standard NADC SMIQ
1125.5555.03 E-92.272
SAVE/RCL FRAME...
Opens a window for saving and loading a frame configuration. Loading a
frame affects all parameters that can be set under SELECT SLOT.
FREQ
100. 000 000 0
MHz
FREQUENCY
LEVEL
ANALOG MOD
VECTOR MOD
DIGITAL MOD
DIGITAL STD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
NADC
PHS
IS-95
NADC
PDC
GSM
TRIGGER MODE
EXECUTE TRIG
TRIGGER....
CLOCK...
POWER RAMP C>
SLOT ATTENUA
SAVE/RCL FRA
1
TCH
GET PREDEFINED FRAME
...
REFCALL FRAME...
SAVE FRAME...
DELETE FRAME...
LEVEL
-30.0
dBm
PEP
-27.6
dBm
Fig. 2-181 Menu DIGITAL STD - NADC - SAVE/RCL FRAME, SMIQ equipped with Modulation Coder
SMIQB20 and Data Generator SMIQB11
(SAVE/RCL FRAME...) GET PREDEFINED
FRAME...
Loads a factory-set frame configuration.
DN_TCH Downlink traffic channels in all slots.
UP1TCH Uplink traffic channels in slot 1
IEEE
:SOUR:NADC:FLIS:PRED:LOAD "dn_tch"
RECALL FRAME
Loads a frame configuration saved by the user.
IEC/IEEE-bus
:SOUR:NADC:FLIS:LOAD "name"
SAVE FRAME
Saves a user-defined frame configuration.
IEC/IEEE-bus
:SOUR:NADC:FLIS:STOR "name"
DELETE FRAME
Deletes a frame configuration saved by the user.
IEC/IEEE-bus
:SOUR:NADC:FLIS:DEL "name"
LINK DIRECTION
Selection between UPLINK and DOWNLINK. Depending on this selection,
various burst types are offered under SELECT SLOT.
IEC/IEEE-bus command
:SOUR:NADC:LINK UP
To Next Page
Loading...
