Rohde & Schwarz SMIQ02B - Page 74

SMIQ Front Panel
1125.5555.03 2.5 E-7
2 DATA INPUT
Unit keys with enter function
G
n
M
k
x1
µ
m
ENTER
dBµV
µV
mV
dB(m)
The unit keys terminate the input of values and specify
the multiplication factor for the respective basic unit.
The basic units are displayed next to the input field
while numbers are entered. In the case of level
settings, the unit keys specify the unit.
G/n dBµV Selects giga/nano, with RF level
dBµV, with LF level dBu.
M/µµV Selects mega/micro, with level
µ
V.
k/m MV Selects kilo/milli, with level mV.
1x
Enter dB(m) Terminates entries in the basic
unit and value inputs without unit.
Selects with level dBm
Selects with level offset and level
step width dB.
In order to change to another level unit, simply press
the unit key desired. Parameter LEVEL must be
activated, e.g. by pressing the [LEVEL] key.
see as well
Chapter 2
Section
"Basic Operating
Steps"
Section
"Change Unit of Level"
3 MENU/VARIATION
Menu keys
SELECT
RETURN
ïð
The menu keys access the menus and settings within
the menus.
RETURN Returns the menu cursor to the
next higher menu level.
SELECT Acknowledges the choice marked
by the menu cursor
⇐ Moves the digit cursor to the left by
one position in the marked value
indication.
Moves the menu cursor to the left
by one position in a 1-out-of-n
selection.
Þ Moves the digit cursor to the right
by one position in the marked value
indication.
Moves the menu cursor to the right
by one position in a 1-out-of-n
selection.
see as well
Chapter 2
Section
"Basic Operating
Steps"