SMIQ Front Panel
1125.5555.03 2.9 E-7
4
Q
Q Input external modulation signal for I/Q
modulation.
Output* Q-signal with operating mode
internal.
Input/output resistance 50 Ω.
Nominal voltage: U
s
= 0.5 V
max. permissible overvoltage: ± 5V
Section
"Vector Modulation"
RF 50
RF Output RF signal.
Source resistance 50 Ω
max. permissible HF-power: 50 W
max. permissible overvoltage: 35 V
Section "Use of
[ON/OFF] and
[MOD ON/OFF] Key"
* When fitted with option Modulation coder, SMIQB20
5
RF
0N/0FF
M0D
0N/0FF
MOD Switches on/off the modulation
ON/OFF selected in the UTILITIES MOD
KEY menu.
RF Switches on/off the RF signal.
ON/OFF
See as well
Chapter 2
Section "Use of
[RF ON/OFF] and
[MOD ON/OFF] Keys"
6
LOCALHELPST ATUS
ERROR
PRESET
PRESET Establishes a defined instrument
status.
ERROR* Indicates error and caution
messages.
STATUS* Indicates the instrument status.
HELP* Indicates context-sensitive auxiliary
text.
LOCAL Switches the instrument from the
REMOTE mode (remote control) to
the LOCAL mode (manual control).
* Exit the menus using the [RETURN] key.
See as well
Chapter 1
Section "Preset Setting"
Chapter 2
Section "Help System"
Section "Status"
Section
"Error Messages"
Chapter 3,
"Remote Control"
To Next Page
Loading...
