Roland R-26 - Page 32

Recording
32
REC SOURCE choices for each REC
MODE
REC MODE: 1 CHANNEL
Monaural x 1
Setting Description
ANALOG
(MONO)
Selects the ANALOG IN 1/L
jack input. One monaural
channel will be recorded.
REC MODE: 2 CHANNEL
Stereo x 1
For ANALOG (MONO), monaural x 2
Setting Description
INTERNAL
Selects the internal mics (a
mix of the directional internal
mics and the omnidirectional
internal mics).
ANALOG
Selects the input from the
ANALOG IN 1/L jack and
ANALOG IN 2/R jack. Record-
ing will take place in stereo.
ANALOG
(MONO)
Selects the input from the
ANALOG IN 1/L jack and
ANALOG IN 2/R jack. Two
monaural channels will be
recorded.
PLUG IN
Selects the input from the
PLUG IN MIC jack.
REC MODE: 4 CHANNEL
Stereo x 2
Setting Description
XY+OMNI
Selects the directional
internal mics (stereo) and the
omnidirectional internal mics
(stereo).
INTERNAL
+ANALOG
Selects the internal mics (a
mix of the directional internal
mics and the omnidirectional
internal mics) and the input
from the ANALOG IN 1/L jack
and ANALOG IN 2/R jack.
ANALOG
+PLUG-IN
Selects the input from the
ANALOG IN 1/L jack and
ANALOG IN 2/R jack, and the
input from the PLUG IN MIC
jack.
XY+PLUG-IN
Selects the input from the
internal directional mics and
the PLUG IN MIC jack.
REC MODE: 6 CHANNEL
Stereo x 3
Setting Description
XY+OMNI+INT
Selects the internal mics
(a mix of the direc-
tional internal mics and
the omnidirectional
internal mics), only the
directional mics, and only
the omnidirectional mics.
XY+OMNI
+ANALOG
Selects the input from
the directional internal
mics, the omnidirectional
internal mics, the ANALOG
IN 1/L jack, and ANALOG IN
2/R jack.
XY+ANALOG+P-IN
Selects the input from the
internal directional mics,
the ANALOG IN 1/L jack, the
ANALOG IN 2/R jack, and
the PLUG IN MIC jack.