Roland R-26 User Manual

Recording
52
Using external mics
You can connect a commercially available dynamic mic or condenser mic to the ANALOG IN 1/L
jack or ANALOG IN 2/R jack. If you’re recording an individual instrument, use one mic and record in
monaural.
* If the REC MODE is set to one channel, only the ANALOG IN 1/L jack can be used.
External Mic
MENU Item Setting
REC SETUP REC MODE 1 CHANNEL
MENU INPUT SETTUP MENU Item Setting
INPUT SETTUP ANALOG IN
INPUT TYPE SEPARATE
INPUT 1 PHANTOM POWER
ON if using a condenser mic,
OFF if using a dynamic mic

Roland R-26 Specifications

General

Sample rate	96 kHz
Audio quality	24 bit
XLR in	-
Interface	USB
USB 2.0 ports quantity	1
Product color	Black, Grey
Microphone input impedance	3000 Ω

Weight and Dimensions

Weight	370 g
Dimensions (WxDxH)	82 x 180 x 41 mm