Accessories and modifications
Page 8 RES-445
Line filter LF-xx480
Essential in order to ensure CE conformity.
Optimized for the RESISTRON temperature controller.
Impulse transformer ITR-x
Designed according to VDE 0570/EN 61558 with a one-section bobbin.
Optimized for impulse operation with RESISTRON temperature controllers.
Specified according to the heatsealing application
( ROPEX Application Report).
Communication interface CI-USB-1
Interface for connecting a RESISTRON temperature controller with diagnostic inter-
face (DIAG) to the PC (USB port). Associated PC visualization software for dis-
playing setting and configuration data, and for recording SET and ACTUAL tempe-
ratures in real time.
Booster B-xxx400
External switching amplifier, necessary for high primary currents
(continuous current > 5A, pulsed current > 25A).
Monitoringcurrent transformer
For detecting frame short-circuits on the heatsealing band.
Used as an alternative to the standard PEX-W2/-W3 current transformer.
Transparent front cover TFA-1
For increasing the degree of protection on the front of the controller to IP65.
Also facilitates applications in the food technology sector (GMP).
Adapter for top hat rail mounting, HS-Adapter-01
For mounting the RESISTRON temperature controller RES-445 on a top hat rail
(DIN TS35). Allows the controller to be installed in the electrical cabinet, for instance,
where it is only accessible to authorized persons.
To Next Page
Loading...
