Technical data
Page 10 RES-445
6 Technical data
Type of construction Housing for front panel mounting
Dimensions (W x H): 144 x 72mm; depth: 161mm (incl. terminals)
Line voltage All controller manufactured as of
January 2006
(as of software revision 100):
115VAC version: 110VAC -15%…120VAC +10% (equivalent to 94…132VAC)
230VAC version: 220VAC -15%…240VAC +10% (equivalent to 187…264VAC)
400VAC version: 380VAC -15%…415VAC +10% (equivalent to 323…456VAC)
All controllers manufactured as of January 2004 up to
December 2005
(up to software revision 027):
115VAC version: 115VAC -15%…120VAC +10% (equivalent to 98…132VAC)
230VAC version: 230VAC -15%…240VAC +10% (equivalent to 196…264VAC)
400VAC version: 400VAC -15%…415VAC +10% (equivalent to 340…456VAC)
All controllers manufactured up to December 2003:
115VAC, 230VAC or 400VAC, tolerance: +10% / -15%
depending on device version ( Kap. 13 „How to order“ auf Seite 68)
Line frequency 47…63Hz, automatic adjustment to frequencies in this range
Heatsealing band
type and temperature
range
As of software revision 100:
The temperature range and temperature coefficient can be set independently of
one another in the Configuration menu:
Temperature range: 200°C, 300°C, 400°C or 500°C
Temperature coefficient: 400…4000ppm (variable setting range)
Up to software revision 027:
Several different ranges can be selected on the controller in the Configuration
menu:
Temperature coefficient 410ppm, 0…300°C (SW revision 021 or higher)
Temperature coefficient 460ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 510ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 570ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 630ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 700ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 780ppm (e.g. Alloy L)
0…200°C, 0…300°C, 0…400°C, 0…500°C
(SW revision 011 or higher)
Temperature coefficient 870ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 980ppm, 0…300°C (SW revision 019 or higher)
Temperature coefficient 1100ppm (e.g. Alloy 20):
0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 3500ppm (e.g. NOREX):
0…200°C, 0…300°C
Set point selection/
analog input
Terminals 20+23
Via the Settings menu in the controller or the electrically isolated analog input:
Input resistance: 40kohms, reverse polarity-protected
0…10VDC, equivalent to 0…300°C or 0…500°C
To Next Page
Loading...
