Accessories and modifications
RES-445 Page 9
5.2 Modifications (MODs)
Owing to its universal design, the RESISTRON tempe-
rature controller RES-445 is suitable for a very wide
range of heatsealing applications.
Modifications (MOD) are available for the RESISTRON
temperature controller RES-445 for implementing spe-
cial applications.
MOD 01
Amplifier for low secondary voltages
(U
R
= 0.25…16VAC). This modification is necessary,
for example, for very short or low-resistance heatse-
aling bands.
MOD 33
(Software revision 010 or higher)
Important heatsealing process data can be output and
logged via a serial RS232 interface ( MOD 33" docu-
mentation).
This modification is only recommended for
existing applications. The PC visualization
software ( section 10.22 "Diagnostic interface/
visualization software (as of software
revision 100)" on page 52) should be used for all
new applications.
Lockable door TUER-S/K-1
Transparent door (with lock) for mounting on the bezel of the controller. The display
is clearly legible at all times. The keyboard can only be operated, however, by autho-
rized persons in possession of a key.
Measurement cable UML-1
Twisted measurement cable for the U
R
voltage measurement.
Trailing cable, halogen and silicone-free.
To Next Page
Loading...
