23/05/2019Roundshot VR Drive Instruction Manual – Firmware Version 2.023 23
2.1.1 Roundshot VR Drive “full” (continued)
When mounting the camera with nodal rail in the opposite direction, the xml file will
not be correct and the stitching will not work. Please also check section “Frequently
Asked Questions” for additional information on how to recover an incorrect xml.
Turn the VR Drive off.
If the default parking position has not been changed, the camera should now point +90°
towards the sky (zenith).
If the camera points -90° down to the ground (nadir), you have mounted the camera + nodal
rail in the opposite way on the nodal rail clamp (y-motor).
To Next Page
Loading...