CALCULATING STATE TAX TABLE CODES Appendix 2
STEP B: Enter the first amount (lower amount) of the last tax bracket of the "Irregular" breakpoint sequence.
Then press the (ST W/TAX) key.
NOTE: Do not enter this amount by using the ( . ) Decimal Point key.
PROGRAM EXAMPLE:
TYPE
PRESS
(243) (ST W/TAX)
STEP C: Enter the total of all the breakpoints of the "Regular" breakpoint sequence, then press the
(ST W/TAX) key.
PROGRAM EXAMPLE: Regular breakpoint sequence 29+28+29+29+28+29+28=200
TYPE
PRESS
(200) (ST W/TAX)
STEP D: Enter the difference between the last tax amount applicable to the "Regular" breakpoint sequence and
the last tax amount applicable to the "Irregular" breakpoint sequence. Then press the
(ST W/TAX) key.
PROGRAM EXAMPLE: 0.16 - 0.09 = 0.07
TYPE
PRESS
(7) (ST W/TAX)
STEP E: Enter the individual breakpoints of the "I rregular" breakpoint sequence, then press the (ST W/TAX) key.
The (ST W/TAX) key must be pressed after each breakpoint entry.
PROGRAM EXAMPLE: Irregular breakpoint sequence: 15,23,25,25,25,30,36,34,30
TYPE
PRESS
(15) (ST W/TAX)
(23) (ST W/TAX)
(25) (ST W/TAX)
(25) (ST W/TAX)
(25) (ST W/TAX)
(30) (ST W/TAX)
(36) (ST W/TAX)
(34) (ST W/TAX)
(30) (ST W/TAX)
STEP F: Enter the individual breakpoints of the "Regular" breakpoint sequence, then press the (ST W/TAX) key.
The (ST W/TAX) key must be pressed after each breakpoint entry.
PROGRAM EXAMPLE: Regular breakpoint sequence: 29,28,29,29,28,29,28
TYPE
PRESS
(29) (ST W/TAX)
(28) (ST W/TAX)
(29) (ST W/TAX)
(29) (ST W/TAX)
(28) (ST W/TAX)
(29) (ST W/TAX)
8 (28) (ST W/TAX)
To Next Page
