(Continued) COUPON DISCOUNT
"PRG" + [PLU/ALT] + (Tax Status) + [CPN]
2 digits
The following two examples list the most commonly used options in programming the Coupon Discount [CPN] key.
VERSION 1: Select if y ou want the tax rate to be charged on the original amount of an
item (the amount before the coupon is deducted).
Example: The Tax Status Numbers for Setting 1 and 2 are "0":
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS
the [CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. PRESS [PLU/ALT], TYPE (00), then PRESS the [CPN] key.
Note: See Transaction Example 18 on Page 75 to ring up a coupon sale programmed with Version 1.
VERSION 2: Select if no tax is programmed in the cash register or it you want to charge the
tax rate on the discounted amount of an item (the amount after the coupon
is deducted).
Example: The Tax Status selected for Option 1 is "0" and Option 2 is "1":
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS
the [CHECK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. PRESS [PLU/ALT], TYPE (01), then PRESS the [CPN] key.
Confirmation Report: The programming of the Coupon Disc ount key [CPN] is done in the non-print mode. To
check your results, a Program Confirmation R eport is available. Coupon will print on the "X"
and "Z" reports as well as on the receipt.
30
To Next Page
Loading...
