PRICE LOOK-UP (PLU)
A total of 1000 Price Look Up codes (PLUs) are available on this cash register. Each PLU can be programmed with
a 12 character description that will print on the tape. The Pr ice-Look Up system allows for fast, accurate entry of an
item and automatically records the number of items sold.
The first step in programming PLUs is to assign a PLU number between 1 and 1000 to each sales item. Second, the
PLU Number must then be linked to a Department key which has the appropriate Tax Status needed for that PLU.
For example, if PLU #1 is required to charge tax, then link it to a Department key which is set up for tax. Whereas, if
PLU #2 is not required to charge tax, then link it to a D epartment key which is programmed for no tax. Lastly, each
PLU (1-1000) can be programmed with a name or description. The PLU name will print on the receipt or journal tape
as well as on the PLU report.
* This register w ill maintain daily sales totals of 1000 PLUs; or both daily and periodic
(weekly or monthly )
sales totals of 500 PLUs.
To use the periodic PLU system, Flag 7, Option 1 on Page 54 must be programmed.
TO PROGRAM PLU's
"PRG"+(PLU #)+[PLU]+(PRICE)+[DEPARTMENT]+(DESCRIPTION)+[AMT TEND/TOTAL]+[#/ST/NS]
1-1000 6 digits (maximum) 12 digits (maximum)
Repeat for each PLU
Note: If you are programming PLUs using consecutive numbers (starting at 1, 2, 3, etc.), it is not necessary to enter
the PLU numbers each time. The register display automatically prompts you with the next PLU number.
Example: Set PLU #1 with a $2.99 price, linked to Department 1; description of "Apple":
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
key, or if you did not program a Manager Password, go to Step 3.
3. TYPE (1), then PRESS the [PLU] key.
4. TYPE (299), then PRESS the [DEPARTMENT 1] key . Important: It is not necessary to press the
decimal point when entering a price.
5. Input the characters (A)(P )(P)(L)(E) using the alpha keyboard (D epartment keys) or the Alphanumeric
Code Chart if needed (see Page 43). Remember, the D epartment Shift key accesses the letters in the
lower green section of the Department keys.
6. PRESS the [AMT TEND/TOTAL] key to finalize.
7. Repeat Step 3, Step 4, Step 5 and Step 6 to program other PLUs.
8. When PLU Programming is complete, PRESS [#/ST/NS] to finalize.
35
To Next Page
Loading...
