TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to TYPE the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 4: CHARGE SALE - (Ring up a $1.00 item in Department 1 and finalize the sale with the CHG key):
1. TYPE (100), then PRESS the [DEPARTMENT 1] key. DEPT01 I 1.00
2. PRESS the [CHG] key. It is not necessary to enter ITEM CT 1
any amounts before pressing the Charge key. TAX 0.06
CHARGE 1.06
Note: A triangular indicator will light on the display under 05-11-1998 04:27PM
"CHG" when the [CHG] key is operated. 0011 CLERK 1
EXAMPLE 5: CHECK SALE - (Ring up a $1.00 item in Department 1 and finalize the sale with the CHK key):
1. TYPE (100), then PRESS the [DEPARTMENT 1] key. DEPT01 I 1.00
2. PRESS the [CHK] key. When needing to tender ITEM CT 1
change with the Check key, enter the amount of the TAX 0.06
check before pressing the Check key. CHECK 1.06
05-11-1998 04:27PM
Note: A triangular light will light on the display under 0012 CLERK 1
"CHK" when the [CHK] key is operated.
EXAMPLE 6: SPLIT TENDERING SALE - (Ring up a $15.00 item in Department 1, split the total of the sale
between $5.00 in cash payment and $10.90 in charge payment):
1. TYPE (1500), then PRESS the [DEPARTMENT 1] key. DEPT01 I 15.00
2. PRESS the [ST/W/TAX] key. ITEM CT 1
3. TYPE (500), then PRESS the [AMT TEND/TOTAL] key. TAX 0.90
4. PRESS the [CHG] key. TOTAL 15.90
CASH TD 5.00
Note: In using the Split Tendering function, the amount in CHARGE 10.90
cash must always be registered first. Split Tendering 05-11-1998 04:28PM
can also be finalized with the Check key. Simply 0013 CLERK 1
substitute the Check key in Step 4 of this example.
70
To Next Page
Loading...
