TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to TYPE the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 1: CASH SALE WITHOUT TENDERING CHANGE - (Ring up a $1.00 item in Department 1):
1. TYPE (100), then PRESS the [DEPARTMENT 1] key. DEPT01 I
1.00
2. PRESS the [#/ST/NS] key. The #/ST/NS key does not ITEM CT 1
need to be depressed if you do not want the subtotal of a TAX 0.06
sale to print. CASH 1.06
3. PRESS the [ST/W/TAX] key. 05-11-1998 04:24PM
4. PRESS the [AMT TEND/TOTAL] key. 0007 CLERK 1
Note: A triangular indicator will light on the display under "CA"
when the [AMT TEND/TOTAL] key is operated, indicating
a cash sale.
EXAMPLE 2: CASH SALE WITH TENDERING CHANGE - (Ring up a $1.00 item in Department 1 and compute
change from $5.00 cash tendered):
DEPT01 I 1.00
1. TYPE (100), then PRESS the [DEPARTMENT 1] key. ITEM CT 1
2. PRESS the [#/ST/NS] key. The #/ST/NS key does not TAX 0.06
need to be depressed if you do not want the subtotal of a TOTAL 1.06
sale to print. CASH TD 5.00
3. PRESS the [ST/W/TAX] key. CHANGE 3.94
4. TYPE (500), then PRESS the [AMT TEND/TOTAL] key. 05-11-1998 04:25PM
0009 CLERK 1
EXAMPLE 3: USING THE DEPT SHIFT key AND TENDERING CHANGE - (Ring up a $1.00 item in Department
1, $2.00 in Department 2 and $3.00 in Department 1 and compute change from $10.00 cash
tendered):
DEPT01 I 1.00
1. TYPE (100), and then PRESS the [DEPARTMENT 1] key. DEPT02 2.00
2. TYPE (200), then PRESS the [DEPARTMENT 2] key. DEPT01 I 3.00
3. TYPE (300), then PRESS the [DEPARTMENT 1] key. ITEM CT 3
4. PRESS the [ST/W/TAX] key. TAX 0.24
5. TYPE
(1000), then PRESS the [AMT TEND/TOTAL] key. TOTAL 6.24
CASH TD 10.00
CHANGE 3.76
05-11-1998 04:26PM
0010 CLERK 1
69