EasyManua.ls Logo

Royal 580 - Page 28

Royal 580
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(Continued) TAX RATE
TO PROGRAM A SECOND TAX TABLE RATE
"PRG" + (ENTER TAX #) + [PO/-%] + (STATE TAX TABLE CODE) + [ST W/TAX] + [#/ST/NS]
1: Tax 1
2: Tax 2 Repeat for each code
3: Tax 3
Example: The tax code for Arizona's tax rate of 5% is: 90-100-5-11-17-20-21-21-20-20-20-20-20.
To program this under Tax 2, follow the instructions in Step 1 to designate Tax 2 as
a Table Tax and then:
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
key, or if you did not program a Manager Password, go to Step 3.
3. TYPE (2), then PRESS [PO/-%].
4. TYPE (90), then PRESS the [ST W/TAX] key.
5. TYPE (100), then PRESS the [ST W/TAX] key.
6. Continue typing the Stat e Tax Table Codes mentioned and PRESS the [ST W/TAX] key after each
code until finished.
7. When finished, PRESS the [#/ST/NS] key to finalize.
Note: If a mistake occurs during pr ogramming the State Tax Table Codes, PRESS the [CLEAR] key and begin
again with Step 3.
TO PROGRAM A THIRD TAX TABLE RATE
"PRG" + (ENTER TAX #) + [PO/-%] + (STATE TAX TABLE CODE) + [ST W/TAX] + [#/ST/NS]
1: Tax 1
2: Tax 2 Repeat for each code
3: Tax 3
Example: The tax code for Arizona's tax rate of 5% is: 90-100-5-11-17-20-21-21-20-20-20-20-20.
To program this under Tax 2, follow the instructions in Step 1 to designate Tax 2 as
a Table Tax and then:
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the [CLERK]
key, or if you did not program a Manager Password, go to Step 3.
3. TYPE (3), then PRESS [PO/-%].
4. TYPE (90), then PRESS the [ST W/TAX] key.
5. TYPE (100), then PRESS the [ST W/TAX] key.
6. Continue typing the Stat e Tax Table Codes mentioned and PRESS the [ST W/TAX] key after each
code until finished.
7. When finished, PRESS the [#/ST/NS] key to finalize.
Note: If a mistake occurs during pr ogramming the State Tax Table Codes, PRESS the [CLEAR] key and begin
again with Step 3.
Confirmation Report: To check your results, a Confirmation Report of Tax Table Codes is available. For details see
Page 63.
24

Table of Contents

Related product manuals