Royal 580 - Flag Options (Continued); Flag 3:

(Continued) FLAG OPTIONS
FLAG 2: This flag allows you to select the Swiss me thod used for rounding in percentage and multiplication
calculations.
"PRG" + (2) + [RA/+%] + (1 2 3) + [AMT TEND/TOTAL]
NOTE: If you need to change the setting for any of the options selectable with this flag, you must type either "0" or
"1" for all 3 options in order to make the change(s) you require and to reconfirm the default settings for the remaining
options.
Selec t
Options
ROUNDING METHOD and
MULTIPLICATION CALCULATIONS
1
0 = Do not select the Swiss method of rounding.
1 = Select the Swiss method of rounding.
2
0 = Select the first digit in the decimal to be rounded in percentage and
multiplication calculations.
1 = Select the last digit to be rounded in percentage and multiplication calculations.
3
0 = Rounding down (0.1 to 0.9 becomes 0.0)
5 = Rounding (0.1 to 0.4 becomes 0.0, 0.5 to 0.9 becomes 1.0)
9 = Rounding up (0.1 to 0.9 becomes 1.0)
FLAG 3: This flag allows you to select the method used fo r rounding in tax calculation. The point at which
rounding takes place depends on this flag #2 setting.
"PRG" + (3) + [RA/+%] + (1 2 3) + [AMT TEND/TOTAL]
NOTE: If you need to change the setting for any of the options selectable with this flag, you must type either "0" or
"1" for all 3 options in order to make the change(s) you require and to reconfirm the default settings for the remaining
options.
Selec t
Options
ROUNDING METHOD
for TAX CALCULATIONS
1
0 = Do not select the Swiss method of rounding.
1 = Select the Swiss method of rounding.
2
0 = Select the first digit in the decimal to be rounded in tax calculations.
1 = Select the last digit in the decimal to be rounded in tax calculations.
3
0 = Rounding down (0.1 to 0.9 becomes 0.0)
5 = Rounding (0.1 to 0.4 becomes 0.0 and 0.5 to 0.9 becomes 1.0)
9 = Rounding up (0.1 to 0.9 becomes 1.0)
50