Alpha5000ML owner’s manual 38
There are 4 types of confirmation reports:
•
Dept All the department programming. See Running the
Department Confirmation Report on page 62.
•
PLUs All PLU programming. See Running the PLU
Confirmation Report on page62.
•
Clerks All clerks. See Running the Clerk Confirmation Report on
page62.
•
Options All the parameters for setting the register, including
header, footer, scrolling messages, tax rates and so on.
See Running the Options Dump Report on page61.
Clearing an Error
The clear key stops an alarm beep that happened because a key was pressed
that was not correct for that operation.
The clear key does not erase a transaction that was registered by an operating
key and printed on the register tape.
To erase an entry after you press a key that printed the entry on the tape during a
sales transaction, use the clear key to correct the error and undo the last entry.
If the cash register makes a loud error beep, press the clear key to stop it.
If your cash register will not stop making a beeping sound after you press the clear
key, you can do three more things.
If you input the error character, you can use the bksp key to clear the error input.
Half System Clear
If you pressed the clear key and the error beep does not stop, you can do a Half
System Clear. For more information about a Half System Clear, see Half System
Clear on page81.
Full System Clear
If you did a Half System Clear and a Partial Clear and the error beep still does not
stop, as a last resort, you can do a Full System Clear. For more information about the
Full System Clear, see Full System Clear on page 81
To Next Page
Loading...
