Alpha5000ML owner’s manual 46
•
Your foreign currency unit to exchange against.
The Charge setting is like the Check
HALO
Specifies setting a HALO (High Amount Lock-Out) Limit to the transaction.
The max is 99999999(Decimal is 0)
Drawer Max
Specifies setting max amount to Cash Drawer.
The Max is 99999999(Decimal is 0)
Dept Shift Num
Specifies setting minimum increment and average increment when press dept shift
during transaction.
The range is 0~60
Reprint Counter
Specifies setting maximum reprint counter when press enter after transaction
Parameters
To open the System Parameters menu
PRG SYSTEM PARAMETER Parameters
1 Switch the control lock to PRG.
2 If you are prompted for a Manager Password, type the password number and then
press the enter key. If you did not program a Manager Password, go to the next step.
3 Press the Arrow Down key to select SYSTEM PARAMETER. Press the enter
key.
4 Press the Arrow Down key to select Parameters. Press the enter key.
The rest of this section explains each menu option.
Compulsory Amount
Specify whether compulsory input the amount when payment.
Zero Skip Report
Specify whether zero skip when print on the report.