Royal Alpha5000ML - Selecting the Tax System

Alpha5000ML owner’s manual 52
1 Switch the control lock to REG mode.
2 If the clerk numbers are set, do the following:
• Using the round Number keys, press the password and then press the enter
key.
3 Using the Round number keys, enter the 000987. Press enter key. The
receipt Start Training mode print.
4 Now you can ring up sales in training mode. These sales do not appear in the
sales reports.
To Exit Training mode
1 Switch the control lock to REG mode.
2 If the clerk numbers are set, do the following:
• Using the round Number keys, press the password and then press the enter
key.
3 Using the Round number keys, enter the 000789. Press the subtotal key.
The receipt Exit Training mode print.
4 Now you can ring up sales normally. These sales do appear on sales reports.