Ruckus Wireless ZoneDirector 1100 User Manual

Controlling Network Access Permissions
Configuring Application Denial Policies
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B 137
• Isolate wireless client traffic from all hosts on the same VLAN/subnet:
Prevent clients from communicating with any other hosts on the same subnet
or VLAN other than those listed on the Client Isolation Whitelist. If this option
is chosen, you must select a Whitelist from the drop-down list of those you
created on the Configure > Access Control page.
4 Click OK to save your changes.
Figure 75. Selecting a Client Isolation White List
Configuring Application Denial Policies
This option allows the administrator to deny application access by blocking any
HTTP host name or L4 port. Using application denial policies, administrators can
block specific applications if they are seen to be consuming excessive network
resources.
The following usage guidelines need to be taken into consideration when defining
Application Denial Policies:

Ruckus Wireless ZoneDirector 1100 Specifications

General

Brand	Ruckus Wireless
Model	ZoneDirector 1100
Category	Controller
Language	English