DescriptionSetting
NOTE This option only appears if you are using an AP
with external antenna support (e.g., the 7372-E AP).
To enable the external antenna, select the Enabled option
in this section. This option is disabled by default.
External Antenna
3. Click Update Settings to save your settings.
Configuring Common Advanced Settings
The Common Advanced settings provide options for configuring Transmit Power and
Protection Mode.
CAUTION! Advanced wireless settings should only be changed by an experienced
administrator. Incorrect settings can severely impact wireless performance. It is
recommended that the default settings are retained for best performance.
NOTE To fully benefit from the AP's capabilities, it is advisable not to change these
values unless absolutely necessary.
1. On the Configuration > Wireless page, click Advanced Settings: Edit Common
Settings. The Configuration > Wireless > Advanced > Common page appears.
NOTE If you are using a dual-band AP, go to Configuration > Radio 2.4G or
Configuration > Radio 5G > Edit Common Settings.
102
ZoneFlex Indoor Access Point Release 104.0 User Guide
Configuration
Configuring the AP
To Next Page
Loading...
