Configuring Wireless # (WLAN Number) Settings
The AP provides up to eight wireless LANs per radio that can be individually configured
to provide different kinds of services for different kinds of wireless clients, traffic types
or different user groups.
Each WLAN can be configured with separate security settings, VLANs, access controls
and rate limiting policies, among other settings.
1. Go to Configuration > Wireless (or Configuration > Radio 2.4G/Radio 5G). The
Configuration > Wireless > Common page appears.
2. Click one of the eight Wireless (#) tabs. The Configuration > Wireless > Wireless
[#] page appears.
Figure 54: Wireless # (WLAN number) settings
3. Review the WLAN options listed in the following table, and then make changes as
required.
Table 44: WLAN options
DescriptionOption
This wireless network name is for management purposes only,
and is not visible to the user.
Wireless Network
This option controls whether or not the wireless network is
available to users (Enabled or Disabled).
Wireless
Availability
This option controls whether or not the WLAN SSID is visible to
anyone looking for wireless networks. Disabling (hiding) the SSID
requires the user to be told the correct SSID before they can
connect to your network.
Broadcast SSID
104
ZoneFlex Indoor Access Point Release 104.0 User Guide
Configuration
Configuring the AP
To Next Page
Loading...
