DescriptionOption
By default this option is enabled. This
connection mode requires a security
certificate, a copy of which has been
pre-installed in the device.
HTTPS Access
This field lists the default HTTPS port of
443—only if HTTPS has been activated.
You can manually change this port
number if required.
HTTPS Port
This notes whether the security certificate
linked to the HTTPS settings has been
passed or not.
Certification Verification
• Enabled (default) -- Lightweight
Access Point Protocol controller
discovery on. (Refer to Release Notes
for details.)
• Disabled -- LWAPP controller
discovery off.
Controller Discovery Agent (LWAPP)
• Enabled (default) -- Fully Qualified
Domain Name cloud discovery on;
requires enabled LWAPP controller
discovery Enabled. (Refer to Release
Notes for details.)
• Disabled -- FQDN cloud discovery off.
Cloud Discovery Agent (FQDN)
• Enabled -- The AP uses an IP address
to search for the primary and/or
secondary SCG, SZ, vSZ or ZD
controller. When Set Controller
Address is Enabled, enter the required
primary controller IP address and the
optional secondary controller IP
address.
• Disabled (default) -- The AP does not
use IP address(es) to search for SCG,
SZ, vSZ or ZD controllers.
Set Controller Address
136
ZoneFlex Indoor Access Point Release 104.0 User Guide
Administration
Enabling Other Management Access Options
To Next Page
Loading...
