Web-based Configuration Guide Fast Internet Access
2
If you forget your password and enter the incorrect password to log in, you will need to wait for 10 minutes
after each 10 unsuccessful attempts.
If you forget the IP address or password, hold down the Reset button for more than 10 seconds to restore factory
settings. After restoration, you can use the default IP address and password to log in.
Caution
Restoring factory settings will delete existing configuration and you are required to configure Internet access
again at your next login. Therefore, exercise caution when performing this operation.
If you choose to retain the configuration while restoring the device to its factory settings, the device will be
reset to its default configurations while retaining the network settings, Wi-Fi parameters, and time zone
configuration.
If the router in the initial state detects that the IP address of the primary router is 192.168.110.1, the router
automatically changes its own IP address to 192.168.111.1 to avoid an IP address conflict. You may fail to log
To Next Page
Loading...
Need help?
General
