Web-based Configuration Guide Wi-Fi Network Settings
24
2.3 Enabling Band Steering
Caution
Before enabling the band steering, you must enable the dual-band integration. Because the client can
automatically choose to steer to either band only when the 2.4G and 5G bands use the same SSID.
Note
The RG-EW300-PRO router does not support the 5G band.
On mobile phone: Choose Wi-Fi > Wi-Fi Settings.
Click the target Wi-Fi network.
PC View: Choose More > WLAN > Wi-Fi > Wi-Fi Settings/Guest Wi-Fi/Smart Wi-Fi.
Click Band Steering. The 5G-capable client will access 5G radio preferentially after this function is enabled.
2.4 Adding a Wi-Fi Network
2.4.1 Overview
The router supports three types of Wi-Fi networks: primary Wi-Fi network, guest Wi-Fi network, and smart Wi-
Fi network, and only one Wi-Fi network can be configured for each type.
Primary Wi-Fi: The primary Wi-Fi network is listed in the first line of the page and is enabled by default.
Guest Wi-Fi: This Wi-Fi network is provided for guests and is disabled by default. It supports user isolation,
that is, access users are isolated from each other. They can only access the Internet via Wi-Fi, but cannot
access each other, improving security.
To Next Page
Loading...
Need help?
General
