Web-based Configuration Guide Networks Settings
39
3.5 Configuring IPv6 Address
With the popularity of the network, the IPv4 address fails to meet demands. The 128-bit IPv6 address solves the
problem of IPv4 address exhaustion.
Mobile Phone View: Choose More > Switch to PC > More > Basics > IPv6 Address
PC View: More > Basics > IPv6 Address
3.5.1 Configuring the IPv6 Address of the WAN Port
Internet Connection Type: If you select DHCP, and the device will get an IPv6 address from the upstream device.
If you select Static IP, please configure the IPv6 address, gateway address and DNS server address manually.
If you select NULL, the IPv6 address function will be disabled on the WAN port.
If the DHCP mode fails, turn on NAT66 and try again. If the fault persists, you are advised to consult the local
ISP about the IPv6 status of the network.
Caution
When IPv6 is enabled, The MTU of IPV4 WAN port need higher than 1280.
To Next Page
Loading...
Need help?
General
