Web-based Configuration Guide Configuring the Repeater Mode
82
(2) Select the Wi-Fi signal of the primary router and enter its Wi-Fi password. You can configure a new Wi-Fi
network or have a Wi-Fi network the same as that of the primary router:
○ If you select Same as Primary Router Wi-Fi, the Wi-Fi settings of the primary router are automatically
synchronized to the current router. Generally, clients merge Wi-Fi signals with the same SSID into one
Wi-Fi signal, and they can search out only the Wi-Fi signal of the primary router.
○ If you select New Wi-Fi, you can set a local SSID and password. Clients will search out a Wi-Fi signal
different from the primary router Wi-Fi signal.
Caution
After the configuration is saved, the Wi-Fi network will be disconnected and you need to connect to the new
Wi-Fi network. Exercise caution when performing this operation. Remember the new SSID and password.
To Next Page
Loading...
Need help?
General
