Sam4s ER-230 Series - Program 80 - Function Key Descriptor

102 • Contents Sam4S ER230 Series Electronic Cash Register AU
Program 80 - Function Key Descriptor
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 8 0, press the SBTL key.
0 SBTL 8
3. If you are programming alpha overlay
X/TIME
Type up to 12
descriptor keys
FUNCTION
KEY
or,
Enter up to 12
three-character codes
FUNCTION
KEY
4. To program additional function keys, repeat from step 3, or press the CASH key to finalise
the program.
CASH
NB: The MACRO (1 -8) function keys descriptor is programmed with Programmed 711. Please
refer to Miscellaneous Programming - Macro Name Programming.